What is the cost of setting up an aluminum extrusion factory?
What is the cost of setting up an aluminum extrusion factory?
The cost of setting up an aluminum profile factory is nothing more than: Labor, water and electricity, natural gas, mold costs, maintenance costs, scrap costs, additional processing costs for aluminum billets, rent costs, equipment depreciation, financial costs, management costs, etc., and one set of aluminum extrusion production line.
Because the size of the aluminum profile that is produced determines the specifications of the extrusion line you need to use.
Aluminum extrusion machine with different specifications are applied, the size of the aluminum extrusion produced will be different.
The larger the aluminum profiles size, the bigger tonnage capacity the extrusion press will be applied.
In the production, according to the shape and size of the section of an aluminum profile, the size of the extrusion mold is determined, and it is determined whether the extrusion mold is a flat die or a porthole die.
If the mold size is known, the tonnage capacity of the extrusion machine is basically determined.
![Aluminum extrusion machine](https://www.machine4aluminium.com/wp-content/uploads/Aluminum-extrusion-machine.jpg)
If we want to set up a new aluminum extrusion factory, here is the detailed information for the cost
600T aluminum extrusion press, billets heating furnace with hot log shear, mold heating oven, cooling bed and run out table, puller and aging furnace, the estimated cost is 250,000.00-500,000.00USD based on different brand extrusion machine and auxiliary equipment;
800T aluminum extrusion press, billets heating furnace with hot log shear, mold heating oven, cooling bed and run out table, puller and aging furnace, the estimated cost is 300,000.00-600,000.00USD based on different brand extrusion machine and auxiliary equipment;
1000T aluminum extrusion press, billets heating furnace with hot log shear, mold heating oven, cooling bed and run out table, puller and aging furnace, the estimated cost is 400,000.00-750,000.00USD based on different brand extrusion machine and auxiliary equipment.
That is only for aluminum extrusion production line machine cost.
We have to consider the shipment freight cost, the installation and commissioning cost.
Also for a new factory, the gas connection and installation, the environmental impact assessment, the operation forklift and aluminum billets cost (outsourcing) and working fund will be considered
For one aluminum extrusion production line, one shift workers are at least 5 person and 2 shifts-3 shifts will be 10-15 person.
So the cost of setting up one aluminum extrusion factory will be at least 350,000.00USD.
This aluminum extrusion production line is only for mill finish aluminum extrusion, without any surface treatment.
If we want to make aluminum billets ourselves, the melting and casting equipment will be necessary.
If we want to make aluminum profiles anodized or powder coated, the anodizing workshop and or powder coated workshop will be necessary for the operation.
![Aluminum profile extrusion](https://www.machine4aluminium.com/wp-content/uploads/Aluminum-profile-extrusion.jpg)
A complete aluminum profile production line generally consists of the following equipment:
Aluminum melting workshop
Aluminum melting furnace
Casting platform
Billet cast mold
Billet cutting machine
Homogenizing furnace
Aluminium dross processing machine(optional)
Online degassing equipment (optional)
Permanent magnetic stirrer (optional)
Bag house dust collector (optional)
Aluminum extrusion workshop
Aluminum extrusion press
Aluminum billets heating furnace
Mold heating oven
Cooling fan
Cooling bed and run-out table
Extrusion line cutting saw
Aging furnace
Aluminum profile anodizing workshop
Water chilling unit
Coloring machine
Refrigeration unit
Heat exchanger
Filter press
Lifter
Aluminum profile brushing machine
Aluminum profile polishing machine
Sand blasting/shot blasting machine
Aluminum profile electrophoresis coating workshop
Electrophoresis equipment
Aluminum profile powder coating workshop
Powder-coated equipment
Thermal break aluminum profile production line
Wood grain effect sublimation machine
Aluminum profile mold workshop
Nitriding oven
Machining Center
Lathe
Milling machine
Wire cutting
Electric spark
Mold quenching furnace
Laboratory
Spectrometer
Hydrogen meter
Metallographic equipment
Laboratory equipment, consumables
Packaging Equipment
Aluminum profile wrapping machine
Aluminum profile film applicator machine
Aluminum profile hot shrink packaging machine
Aluminum profile automatic bagging machine
Environmental protection facilities and other auxiliary equipment
Wastewater treatment equipment
Dust removal equipment
Crane
Water pump
Cooling Tower
Forklift
Air compressor
Boiler
Power distribution equipment
Molds and consumables
Extrusion die and tooling
Release oil
Felt strip
Hydraulic oil
Cutting oil
Mold repair tools Etc.
Comment * Hi
Can you send me details of machines required for making anodised and powder coated profiles.
thanks
Comment *Our company needs a aluminum 6063 extrusion press , is it possible to send me the technical specifications of a machine with a capacity of 1650T or 1500T.
Best Regard.
Comment * Required Price list of the total line of Aluminium extrusion line (1200 Mt per month)
Required the price list of the following items:
1) 6 mtr length Billet cutting system & feeding to the press
2) Extrusion Press
3) Finish Cutting System
4) Profile handeling Table
Dear Mr Dipanjan Ghosh
Thank you for your kind comment
Email sent for the general information and project quotation.
Best regards
Brightstar Aluminum Machinery
Comment *
Hi
We are facade company in process of launching our own extrusion plants.
Please let me k ow how you can support.
Thanks
Bahaa derbas
Dear Bahaa
Thank you for your kind comment
The general information was shared by email. The project quotation can be sent by email.
Best regards
Brightstar Aluminum Machinery
Comment *Hello!
I work at a company that is interested in building a factory for aluminum extrusions.
We would like your inputs as to which equipment (with their specs) we need for our processes. We would like to exchange with you.
Comment * Aluminium profile Extrusion plant
I want to an implement an aluminum profile extrusion factory.
which produces aluminum panels for use in contracting work (Aluminum Formwork)
Yasir
Dear Mr Yasir Aljuaid
Thank you for your kind comment
The general information was sent by email.
The project quotation can be sent after we get your reply
Best regards
Brightstar Aluminum Machinery
Comment *
Dear
Have a nice day
Pls send me your catalogue and quotation for aluminium profile plant equipment and machine completely from melting scrap up to packaging products.. for output capacity 50 tons per day.
Best regards
Ahmed (Aran)
Dear Ahmed
Thank you for your kind comment
The project quotation was sent by email
If you need any more information on aluminum extrusion plant setup, please feel free to let us know
Best regards
Brightstar Aluminum Machinery
Comment * Hello,
I’m interested in investing in Aluminium extrusion factory in Bosnia and Hercegovina.
Can you please send me some catalog ol plans that you have make?
I’m interested in factory with 800T press complete, powder coating and melting workshop.
Please send me as much info as possible, needed space, power consumption, monthly output, operation manual, example of other factories.
Dear Faruk
Thank you for your kind comment
The general information was shared and the project quotation can be sent after we get your reply
Best regards
Brightstar Aluminum Machinery
Comment *
Dear sir/ madam
My company is interested in installing an aluminium extrusion line in India for that we are looking for 1000 metric tons aluminium extrusion press with a diameter of 127 mm
We are currently into glass processing industry as with the growing demand of aluminium in India so we had planned to invest in aluminium business
Please share your specifications with the prices and what type of machines your company is manufacturing
Dear Sir
Thank you for your kind comment
The general information was shared
The project quotation can be sent after we get your reply
Best regards
Brightstar Aluminum Machinery
Comment * Dear Sir.
We have requirement of Aluminium Extrusion Press for our monthly 35 Ton Extrusion profiles.
Work Timing = 8 Hour Per Day.
Kindly provide the techno-commercial offer by tomorrow so we can move ahead.
Dear Priyank
Thank you for your kind comment
The general information was shared by email.
The project quotation can be sent after we get your reply
Best regards
Brightstar Aluminum Machinery
Comment *
Hello,
we are based in Jamnagar, Gujarat, INDIA.
we are planning for Aluminium Extrusion Plant.
Can You Please guide us through the machinery and the process with approx Quotation?
We are planning with 1450MT Extrusion Press and we required machinery according to this press.
Thank You
Yagnesh
Dear Sir
Thank you for your kind comment
The general information was shared by email.
The project quotation can be sent after we get your reply
Best regards
Brightstar Aluminum Machinery
Comment * Hi
This is dileep from India.
Can you tell me more about…what is the cost for setting up an aluminium extrusion factory…?
Our requirement
1. 600 Ton aluminium extrusion press.
2. Aluminium melting workshop.
3. Aluminium dross processing machine.
4. Aluminium profile anodizing workshop.
5. Aluminium profile brushing machine.
6. Aluminium profile polishing machine.
7. Sand blasting.
8. Aluminium profile electro phoresis coating workshop.
9. Aluminium profile powdercoating workshop.
10. Aluminium profile mold workshop.
11. Laboratory
13. Packing equipment
14. Environmental protection facilities
15. Moulds and consumables.
Send quotation for completion setup…!
Dear Dileep
Thank you for your kind comment
The general information was shared and the project quotation can be sent after we get your reply
Best regards
Brightstar Aluminum Machinery
we are planning to set of a new plant for aluminum extrusion. kindly send us the machinery list a turnkey project . required quotation and client list
Dear Mr Francis Waghmare
Thank you for your kind comment
The general information was sent by email and the project quotation can be sent after we get your reply
Best regards
Brightstar Aluminum Machinery
Dear Sir,
Thank you for the Info’s.
We are in a process of seting up a new Aluminum extrusion factory in Addis Ababa,Ethiopia.
Would you please send us the general information and quotation for 600 Yon capacity turnkey project .
Thank you!!
Dear Mr Muaz Salih
Thank you very much for your kind comment
The general information was shared in the email. The project quotation can be sent as we get your reply
Should you have any question, please feel free to contact us
Best regards
Brightstar Aluminum Machinery
Comment * I planning a new business set up of aluminum extrusion plant in Gujarat. Please give me guidance and quotation for machinery.
Dear Mr Pravin Patel
Thank you for your kind comment
The general information was shared and the project quotation can be sent as we get your reply
Best regards
Brightstar Aluminum Machinery
Hi, can you send me quotation of 1 600T aluminium extrusion machine, and a rectifier please ?
I’m planning to expand my factory.
Dear Mr Mulyono
Thank you for your kind comment
The general information was shared and the email was sent.
The project quotation can be made after we get your reply
Best regards
Brightstar Aluminum Machinery
Comment *
Complete aluminium extrusion plant machinery process defined.
Thanks
Savan Kothadiya
Dear Mr Savan Kothadiya
Thank you for your kind comment
The general information was shared by email.
The project quotation of aluminium extrusion plant machinery can be sent after we get your information
Best regards
Brightstar Aluminum Machinery
Comment *hi
looking for 4000 TN Aluminium extrution and Anodzing machine.
Please provide details of required machines and cost.
Also provide the design, area, utilities, power requirement etc.
Nandeesh
Dear Mr Nandeesh
Thank you for your kind comment
The general information for aluminum extrusion plant setup was shared by email.
The project quotation can be made after we get your information
Best regards
Brightstar Aluminum Machinery
Comment *Dear Sir
We are making thermal break profiles in India (Mumbai and Delhi) currently we are buying extrusion from others for the moment we are only consuming 25 to 30 ton per month only for thermal break type other non thermal customers are buying directly from same supplier as we work only in HVAC industry for the moment we now start thinking for window industry as well.
we would like to know the total project cost with melting furness with capacity of 150 – 200 MT per month heaviest weight of profile of 6 meter 11 kg and lightest weight of profile 6 meter is 1.7 kg profile thickness is 2 mm.
if we come to know the total cost including installation training etc so we can work out our financial plan to invest in this project.
Thank you very much
Pandey
Dear Pandey
Thank you for your kind comment
The general information was shared by email. The project quotation for your aluminum extrusion plant can be sent after we get your reply
Best regards
Brightstar Aluminum Machinery
Comment * We are looking to setup our own aluminum extrusion plant.
We do not want to melt our own billet, but we would like to setup the extrusion capability.
We already powder coat and will outsource the anodizing.
Please provide us with the information necessary, along with costs.
Dear Derrick
Thank you for your kind comment
The general information for aluminum extrusion plant setup was sent by email for your reference.
The project quotation can be made after we get your reply
Best regards
Brightstar Aluminum Machinery
Comment *Dear Concerned,
We are willing to set a complete Aluminium Extrusion plant.
We need complete set up starting from melting scrap,to billet casting, billet cutting,aluminium extrusion press, puller,table ,annodising , powder coating and wood sub lamination ,tool room ,die ,packing machines etc
Kindly provide a detail cost for complete set from start to finish.
Production capacity required 10-12 Ton per day.
Also please let us know if you have any office sales/service tie up in India for commissioning the complete set up and for after sales service support.
Warm Regards.
Navin
Dear Navin
Thank you for your kind comment
The general information for the aluminum extrusion plant setup was sent to you by email. The project quotation can be sent after we get your reply
Best regards
Brightstar Aluminum Machinery
Hi, can you let me know how much it is going to cost to put a extrusion plant?
Dear Satendra
Thank you for your kind comment
General information was sent by email. The project quotation can be made after we get your reply
Have a nice day
Best regards
Brightstar Aluminum Machinery
Hi,
I would like to get the quote for setting up the Aluminum production line in Coimbatore.
Please reach out to me
Dear Mr Senthil
Thank you for your kind comment. Happy New Year!
Email sent for the general information. The project quotation can be made after we get your reply
Have a nice holiday
Best regards
Brightstar Aluminum Machinery
I want to setup aluminum extrusion plant. Kindly send the detail report with total cost
Dear Rajesh
Thank you for your kind comment
Email sent for aluminum extrusion production line and the project quotation can be made after we get your reply
Keep taking care
Best regards
Brightstar Aluminum Machinery
Comment *Planning for an aluminum extrusion plant to be set up as soon as possible. Speed is of the essence. Kindly send me the initial details ASAP.
Dear Mr Nitesh
Thank you for your kind comment
Email sent for general information and the project quotation can be made after we get your reply
Take care
Best regards
Brightstar Aluminum Machinery
Comment *I want to plan for machinery equipment can u pls tell me ur contact details
Dear Sir
Thank you for your kind comment
The reply was sent by email. The project quotation and the request information can be sent after we get your reply
Take care and best regards
Brightstar Aluminum Machinery
My planing aluminum manufacturing plant
Dear Sir
Thank you for your kind information
Aluminum extrusion production information was sent by email. The project quotation can be sent after we get your reply
Best regards
Brightstar Aluminum Machinery
Hi there,
We are planning a aluminum extrusion project in Nepal. Can you help us with the details regarding the project?
Dear Rohit
Thank you for your information. Email sent and the project quotation can be made after we get your reply
Best regards
Brightstar Aluminum Machinery
We are planning of setting up a 30,000 – 50,000 tons Aluminum extrusion plant in Nigeria. Already we have land available for the kick off the project. The market for Aluminum extrusion here is huge. I’ll like to get the quotation for the complete production line.
Also we are looking for partners for the project.
Thanks
Dear Sir
Thank you for your information
The reply was sent by email and the project quotation will be made after we get your reply
Keep taking care
Best regards
Brightstar Aluminum Machinery
we are planning for a Plant in UP india please send the details
Dear Amit
Email sent and the project quotation can be sent after we get your reply
Have a nice weekend
Best regards
Brightstar Aluminum Machinery
Planning for aluminium extrusion plant 1800tonn press capacity kindly send me total machine cost.
Dear Mr Shubham Rathi
Thank you for your kind comment
The information was sent to you by email. The project quotation can be made according to your request
Take care and be safe
Best regards
Brightstar Aluminum Machinery
Comment *we are planning for a Plant in Bhopal (MP) please send the details
Dear Ankit
Thank you for your kind comment
The reply was sent to you by email.
The project quotation can be made according to your request
Take care
Brightstar Technical Support Team
We are looking after setting up a full aluminium extrusion line.
Production line supplier, consultant or commision agent are welcome to discuss it further.
Dear Mr A Jiyani
Thank you for your comment.
Email sent for more information and hope it can be helpful for you!
The project quotation can be made according to your request.
Brightstar Aluminum Machinery Technical Team
Comment *aluminium extrusion machinery cost and send me statement
Dear Mr Patel
Thank you for your kind comment
Email sent for general information, the project quotation can be sent after we get your request.
Best regards
Brightstar Aluminum Machinery
I need interest. Buy aluminum profile making full machine Comment *
Dear Sir
Thank you for your kind comment
Email sent to you and the project quotation can be sent after we get your reply
Keep taking care
Best regards
Brightstar Aluminum Machinery